Uniaxial Geogrid

Uniaxial Geogrid 1)PP/HDPE uniaxial geogrid 2)Materials:polypropylene PP or HDPE 3)Tensile strength:20 ~ 280kn/m

1. Uniaxial Geogrid Product description  Uniaxial geogrids are made of the PP(Polypropylene) / HDPE( High Density Polyethylene )by the process of being stretched out, former into lamella, punched regularly and then longitudinal elongated, which enable macromolecule firmed into an oriented lineal, equably distributed uniform ellipsoidal reticulation with intensive node which have higher tensile strength and tensile modul. It should be especially noted that we are able to supply those products with 4 percent to 10 percent tensile rate and a at least 100-200 Mpa tensile strength so as to give soil a perfect standing and diffusing chain system which enable us be the world leading manufacture in this aspect. These products can be used as reinforcing concrete material for all kinds of soil.

2.Application  Uniaxial geogrids are compositional material for civil engineering with high intensity which be widely used ,their main usages are as follows.

1.                               Consolidate road foundations and distribute the load effectively. By these means, the road foundations may have a better stability, endurance and a longer life.

2.                               Help road foundations to bear protean heavy loads.

3.                               Avoid granular base loss and cracking.

4.                               Enhance self-load of filled soil behind the slope and distribute the pressure of slope as well as reduce the cost of construction and maintenance but increase its lifespan.

5.                               Servicing slopes by fusing concrete allow to save investment by 30 percent to 50 percent as well as to shorten the period at least by 50 percent compared to tradition un-reinforced ones.

6.                               Asphalt road take advantage of these products can reduce rut and reflective cracking by 3 to 9 times as well as structural thickness of up to 36 percent.

7.                               Be use in all kinds of soil without getting distant material, which can greatly shorten construction lifespan.

8.                               Greatly reduce the cost of construction with its simple and rapid characteristics.

3 Specification and performance parameter      

PP  Uniaxial Geogrid

Item	TGDG35	TGDG50	TGDG80	TGDG120	TGDG160	TGDG200
Tensile strength (kN / m )≥	35	50	80	120	160	200
elongation at max strain %≤	10
Tensile strength at 2 % strain≥ (kN / m )	10	12	26	36	45	56
Tensile strength at 5 % strain ≥(kN / m )	22	28	48	72	90	96

 

 

HDPE Uniaxial Geogrid

Item	TGDG35	TGDG50	TGDG80	TGDG120	TGDG160
Tensile strength (kN / m )≥	35	50	80	120	160
Tensile strength at 2 % strain≥ (kN / m )	7.5	12	21	33	47
Tensile strength at 5 % strain ≥(kN / m )	21.5	23	40	65	93
elongation at max strain %≤	11.5

 

4. Construction Notes:

Design: By design, the construction of the wall system, elected to use pre-cast reinforced concrete walls, generally 12 ~ 15cm thick in the pre-concrete support on the basis of its broad not more than 30cm, the thickness of not less than 20cm, depth Not less than 60cm should be the foundation to prevent the effects of frost heave. Wall-balance, according to the design requirements the formation of the excavation. Soft soil compaction or a change to be filled, compaction density requirements to be a little beyond the scope of the wall. The laying of reinforced material, reinforcement material should be the main strength of the direction perpendicular to the wall in order to pin fixed. Fill the wall by filling machinery, wood wheel and the distance between bars should be maintained at least 15cm. After the thick layer of soil compaction 20 ~ 15cm. Construction of the wall, the wall should be a package of geotextile to prevent soil loss.

 

Uniaxial Geogrid